CNC-20
Specifications
| Capacity | |
| Max. Swing diameter | 400mm |
| Max. turning diameter | 330mm |
| Max. turning length | 280mm |
| Distance between centers | 280mm |
| Travel | |
| X-axis | 165mm |
| Z-axis | 280mm |
| Spindle | |
| Max.Speed | 3500rpm |
| Spindle nose | A2-6,A2-8(Option) |
| Spindle bearing ID | 90 or 100 mm |
| Spindle bore | 52mm |
| Bar Capacity | 42 or 52 mm |
| Turret (Optional) | |
| Type | 8-station (Opt:12-station) |
| OD tool | 25mm |
| ID tool | Ø 32mm |
| Feed Rate | |
| X-axis | 20m/min |
| Z-axis | 24m/min |
| Hydraulic Tailstock (Optional) | |
| Quill diameter | 75mm |
| Quill taper | MT#4 |
| Travel | 540mm |
| Quill travel | 80mm |
| Motor | |
| Spindle motor | β22P |
| Feed drive motor | β is 12(X,Z axis) |
| Hydraulic motor | 2HP |
| Coolant pump motor | 1 HP |
| Machine Dimensions | |
| Machine weight | 3000kgs |
| L x W x H | 2350x1900 x1800 mm |
✳ The above specifications subject to change without prior notice.
Standard Accessories & Optional Accessories
| Standard Accessories | Optional Accessories | |
| FANUC CNC controller | FANUC 18T CNC controller | |
| 8’’3-jaw hydraulic hollow chuck with hard and soft jaw (each one set) | 10-position turret | |
| High pressure cooling system | 12-position turret | |
| 8-position turret | Parts catcher | |
| Hydraulic tailstock | Tool presetter | |
| Automatic lubrication system | Auto door | |
| Toolbox & Tools | Liquid/oil separator | |
| Chip conveyor and bucket | ||
| Bar feeder | ||